Choosing a heater that does not burn oxygen

Content:

Which ones burn oxygen and which don't?
Types of heaters that do not burn oxygen
Infrared heaters
Ceramic panels
Steam drip heaters
Oil heaters
Quartz heater
Convector heaters
Micathermic heaters

When choosing a heater for an apartment or a house, we are mainly guided by the power criterion, and hence the ability to heat a particular area. However, one must not overlook the fact that different heaters have different effects on the indoor air atmosphere. Many of them dry the air. Therefore, it is very important to make a choice in favor of a device that not only produces warmth, but also maintains a healthy microclimate. After all, this directly affects the state of general well-being and human health. Now let's take a closer look at which heater does not burn oxygen.

Which ones burn oxygen and which don't?

What is the crux of the problem? A certain category of heaters dry the air very much, that is, they greatly reduce the level of moisture. The old generation heaters mainly burn oxygen:

those that have open shadows (spirals),
fan heaters,
fireplaces;
homemade heating devices.

The optimal indicator for humans, the humidity level is 60%. With strong heating, this balance is disturbed, and there is a constant desire to ventilate the house. Such manipulations in the cold season are not very convenient, because it can lead to drafts. And it is illogical to heat and release heat.

Another disadvantage of such heaters is that the dust falling on the heating object entails its combustion, and therefore the exhaust of toxic substances gets into the air.

There are many disadvantages. To make the right choice in favor of a home heater, you should find out which ones do not dry the air.

Modern heaters are designed in such a way that the level of oxygen burning is quite low, and some models do not burn it at all. Fortunately, there is currently a selection of such heaters. All of them differ not only by the brand and manufacturer, but also there are different types and principles of work.

Types of heaters that do not burn oxygen

If you are faced with the question of choosing a safe and efficient heater for home or other premises, then the following options are offered to your attention:

Infrared heaters.
Oil batteries.
Ceramic panels.
Vapor-drop heaters.
Quartz heaters.
Convectors.
Micathermic heaters.

In practice, the listed devices are widely used for heating homes, offices or summer cottages. Let's take a closer look at each of the types.

Infrared heaters

Heaters of this type have proven themselves well. Their direct action is aimed at heating objects, and then heating the room as a whole. Thus, even when it is turned off, the room is kept warm for some time.

It has no effect on the air. That is, they do not overheat it, thereby not burning oxygen.
Safe enough, since infrared rays will never burn a person.
Its advantage is its versatility. Such a heater can be used not only indoors, but also outdoors.
Another advantage is the low power consumption and the relatively low cost of this device.

An infrared heater is somewhat similar to a convector heater, but differs in the principle of operation. Therefore, when choosing, consumers often hesitate between two options.

TOP-3 infrared heaters Ballu

Ballu BHH / M-09
Ballu BIH-LW-1.5
Ballu BIH-APL-0.8

Ceramic panels

This type of heater is characterized by a hidden heating device. Designed in such a way that the heating element is in a ceramic sheath. That is, heat does not come directly from it, but from a heated ceramic surface. It can be emphasized that such a heater dries the air less at times than the one that emits heat from the heated metal surface. Since the latter is more capable of oxidizing air by burning it.

This model is characterized by a relief coating, due to which the surface of the heater heats up less, and therefore will dry the air less.

Steam drip heaters

This radiator has a special scheme of work. It contains a heating element and water as an auxiliary. That is, the water heats up, resulting in the release of warm steam, which heats the room. Condensation is collected in the radiator and a circulation process takes place.

According to the characteristics, it is easy to understand that such a device does not dry the air at all, but on the contrary, contributes to a favorable and necessary level of moisture in the room.

At the same time, a vapor-spray heating device is quite economical, since it consumes little electricity. And when it is turned off, the heat is retained for a long time.

Oil heaters

This type of radiator generates heat by heating the oil inside it. Thus, heat is radiated at a given temperature (depending on the mode).

Oil, like the previous ones, does not burn oxygen, therefore it is optimal for the correct balance of heat and moisture. The advantage of this type of heater is that the apartment heats up quickly. However, among others, it has fewer advantages due to the fact that:

It consumes a lot of electricity.
The surface of the radiator becomes hot. This is the risk of getting burned.
Such a heater must not be left switched on when leaving the premises.

TOP-3 Timberk oil heaters

Timberk TOR 21.1507 BC / BCL
Timberk TOR 21.1005 SLX
Timberk TOR 51.2009 BTM

Quartz heater

A type of infrared type heaters, as well as those that do not reduce the level of moisture in the room. This is because quartz is a highly resistant type of material. It does not heat up to very high temperatures and, as a result, does not burn oxygen. However, it heats objects and people effectively. It gives off pleasant, natural-like warmth.

Convector heaters

A very popular type of heaters for any room. The device has a pretty natural way of working. From below, through the grill, cold air enters the radiator, heats up to the required temperature and goes outside. Over time, the air cools down and the procedure is repeated. Using the sensor, you can set the degree of heat.

The convector works in such a way that heated air comes out, but without loss of moisture. This type of heater does not contain a fan, only heats the air, and the body itself does not heat up, which makes it safe. That is, it is the best way to maintain the set temperature in the room, while not disturbing the humidity level.There are three types of convector heaters - wall-mounted, floor-standing and recessed.

TOP-3 convector heaters Electrolux

Electrolux ECH / AS-1000 MR
Electrolux ECH / R-1500 T
Electrolux ECH / AG2-2500 T

Micathermic heaters

This modern type of heater is a fairly new technology. It belongs to infrared type and is characterized as an economical heating option. Unlike heating devices similar to it, it emits long infrared waves.

Such a device can be used as a floor-standing radiator or mounted on a wall. The heating element of this device is a metal plate with a transparent laminated mineral coating.

Such a heater is considered a know-how among climatic technology, therefore, its cost is higher than others. If you decide to purchase this particular type of heater, then given its novelty and high price, it is recommended:

Follow the instructions for use;
Buy such equipment only in specialized stores, with the possibility of exchange or return if necessary;
Find out about the availability of warranty service.

The good news is that there are plenty of options for heating a room in the cold season. And it is even more pleasing that there is an opportunity to choose one that will not only warm, but also will not harm your health.

It can be safely noted that all the options considered deserve attention. You should choose a specific one based on personal preferences, as well as the dimensions and interior of the room.

See also: