Making a humidifier with your own hands

Content:

Battery + bottle = formula for optimal indoor climate
Humidifier from a plastic bottle
Homemade humidifier from scrap materials
Instead of an epilogue

Need a humidifier but don't know which one to buy? There is an exit! Turn on your wit, pick up "unnecessary" stuff and act. But first, we recommend reading this article to learn how to make a DIY air humidifier. And ... Let's start!

Battery + bottle = formula for optimal indoor climate

how to make a humidifier with your own hands

The ideal humidity inside a residential (and not only) premises should be 40-70%. Such a microclimate can be provided not only by purchased units, but also by home-made ones. For example, you can make a DIY air humidifier on an open battery.. But there is one condition. The battery should not be “hidden in the wall”.

In general, the scheme of operation of this device is quite simple, so you will not have any difficulties in its implementation (at least, it should not). So, to work you need:

plastic bottle with a volume of 1.5-2 liters;
wide scotch tape;
gauze meter;
the cloth.

Humidifier from a plastic bottle

humidifier from a plastic bottle

A humidifier from a plastic bottle is made quickly, and the effect you get is exactly the same as from a store.

We hold the container horizontally. Cut out a rectangle 12x7 cm from the side, where twelve is long, seven is width.
Now you need to attach the structure to the pipe (you can do this using fabric pieces or rope), which comes off the battery. The hole you cut should be right under the pipe. To prevent your humidifier from tipping over, tape the areas where the fabric touches the bottle.
Fold gauze "sausage" one meter long and ten centimeters wide.
We lower one end of the "gauze sausage" into the window cut by you, and with the second we wrap the pipe on which this whole structure is located. To enhance the effect, you can make several of these gauze "sausages".
Fill the unit with water to start the unit.

Homemade humidifier from scrap materials

homemade humidifier

Making a homemade humidifier is much easier than it seems at first glance. For example, you can take cute small ceramic vases, pour water into them and attach them to the accordion of the heater. Both beautiful and beneficial for the microclimate, and, therefore, for health.

But it may happen that you are "overwhelmed" by laziness or the mood for searching for "all sorts of vases" simply will not be. And there is a way out! Just hang a metal can on the battery. Pour water into it and that's it. Two cans can also be used! While one goes through the cleaning process, the second works. But this unit does not last forever. As soon as the heat is turned off, you will have to say goodbye to him.

Bucket and expanded clay - the key to a healthy microclimate

bucket humidifier

How to make the unit yourself, which will provide air humidification? It's easy! If you have a bucket and expanded clay, you can create your own humidifier that not only gives off, but also absorbs moisture.

You will need:

Four buckets "mesh" (something like those used in offices for waste).Two large, two slightly smaller (we are talking about sizes);
a bucket of twelve liters (ideal);
aquarium pump;
computer 14 cm cooler;
construction hair dryer with high heating temperature;
stretch plastic.

Now let's get started.

We glue the smallest buckets together. This can be done either with a household hair dryer or with fasteners.
Now you need to do the same with large buckets, after placing the already glued small buckets there.
Next, cut a hole in the structure and make a cover. We fall asleep expanded clay. The material must be sized so that it does not spill out of the mesh bucket. Is it done?
Now let's take a 12 liter bucket. Place the aquarium pump on the bottom and pull the tubing up to the top of the mesh bucket structure. Now install the plastic ring with holes.
We got to the hardest part of the job - installing the cooler. It is he who will be the "organ" that will make the expanded clay "move" and moisten the space. This is where you need the same ingenuity and scotch tape.

Important:

For this type of humidifier, it is important that the expanded clay is of high quality. Before filling it into the device, be sure to rinse it under running water.

And again plastic

plastic bottle humidifier

Well, something, but everyone has enough plastic in the household. Therefore, consider another example of a DIY home humidifier. So, this time we are going to talk about a device that will give us a cold vapor effect.

You will need:

plastic ten liter bottle:
wide scotch tape;
computer cooler.

Cut off the neck in the bottle so that the cooler fits there.
Now we attach the cooler to the neck. Or tape it up. Or make fasteners.
Plug in the cooler.

That's all. As you can see, there is nothing difficult here. As they say, cheap and cheerful J.

And some more plastic

DIY humidifier

Well, since we have already started, then we need to develop the production of "creative" humidifiers in full. Now we suggest using plastic food storage trays. Such a "refreshing" unit is a little more complex in design, but at the same time much more effective than the previous one.

You will need:

a large plastic box for 30 liters;
smaller tray, always mesh;
gauze;
fishing line / wire;
fan.

Prepared? Now let's go tinkering!

We attach the wire / line to the mesh tray so that it is taut.
We hang the gauze on the fishing line so that it reaches the bottom of the tray. By the way, instead of gauze, you can take a bandage.
Pour water into a large tray and put our structure in it so that the ends of the gauze get wet.
Now we cut out a hole with a diameter of a fan in the lid of a large vessel and place a "wind generator" in it.
Put the cover on the resulting structure and turn on the fan.

Congratulations! You just put together a DIY universal humidifier. Such a homemade unit works quietly. Therefore, you will not feel any discomfort. The average water consumption is one and a half liters per six hours. You will use about 6 liters per day. And this is under conditions of continuous work. Agree, quite an economical piece turned out.

The floor fan turns

fan humidifier

This method is designed for those who are just too lazy to do something: go to the store for a humidifier, spend time looking for it on the Internet, and even more so to make it yourself. But you want fresh air! There is an exit!

First, find a rug in your home.
Wet it (remember to wring it out).
Take a floor fan.
Attach this wet mat to the pipe (position it slightly above the height of your floor tornado).
Hang what you've got above your fan.
Turn on the fan.

Done! Now the microclimate in your room will be within normal limits. But remember to wet the rug periodically.And yes, then you will most likely have to send it (the mat) to the trash can. It is unlikely that it will withstand such a "head" of salt and rust.

Instead of an epilogue

Of course, it is simply impossible to list all the ways to create unique moisturizers, so we appeal to you, dear readers. If you can think of something even more original on the topic "how to make a humidifier with your own hands", be sure to share your "recipes" for a healthy climate in the comments. Look forward to!

Well, that's about it, perhaps! Until next time!

See also: