The Samsung washing machine stops while washing, the sensors flash and the display shows error 1E (1C or E7). This can happen both at the beginning of washing immediately after starting, and at any stage - washing, rinsing, spinning. What to do? What does 1E (1C or E7) mean in a Samsung washing machine? How do I fix the problem myself? You will find answers to all these questions in this article.
How to decipher errors
Error 1E or 1C reports that the pressure switch (water level sensor) does not work correctly or is faulty. The control module receives from the pressure switch inappropriate indicators or does not receive indicators at all. As a result, the washing machine stops the execution of programs and displays an error. On washers manufactured before 2007, a water level sensor malfunction is indicated by code E7.
Some people read error 1E as IE, because on the display, the number 1 looks more like a capital letter I.
Important:
Don't confuse 1E with E1 error, they report different problems. 1E - pressure switch faulty, E1 - problems with water intake.
On Samsung washing machines without a screen, errors 1E, E7, 1C are indicated in this way: all mode lamps blink at the same time and the temperature mode lamps 60 ° C, 40 ° C and “Washing in cold water” are on.
Problems and solutions
- Control module malfunction. Turn off the machine completely, do not turn it on for a few minutes (up to 5 minutes), then press the power button. There is a possibility that the electronic controller that regulates the functioning of the washing unit has failed.
- The contacts on the control board or pressure switch have come off. Make sure that the contacts located from the pressure switch to the control module are located correctly - perhaps one of the connectors on the board or the water level sensor itself is damaged.
- Kink or disconnection of the pressure switch tube. Look at the state of the high pressure pipes of the pressure switch. It acts as a connector between the water level sensor and the pressure take-off chamber. Thanks to her, the pressure switch "learns" how much water has been pumped into the washing machine compartment. During operation, the tube may have bent or fell off altogether. As a result, a signal is received and an error message pops up. Protect this part from kinks or put the tubing back in if it is not connected.
If all the manipulations have been done, and the code still appears on the display, it would be wiser to contact the service center for help and entrust the repair to professionals.
See also - Samsung washing machine gives error OE, E3, OF, OC - what does it mean?
Complex malfunctions
- Damage to the water level switch. The washing starts, but it is clear that there is no water in the drum, the machine starts the heating element, there is a possibility of fire and breakdown of the heater. This is also evidenced by the excess of the level of the amount of injected water. A continuous supply of water is possible. There are situations when the level does not reach the minimum value. In the event of a breakdown of the water level sensor, it is possible that the water does not completely leave the tank, because of this, things are not squeezed out well. In such a situation, it is better to completely replace the pressure switch.
- Failures in the machine control module. There are times when the resistors near the pressure switch connector on the control module burn out, because of this, the board does not find contact with the pressure switch. In this situation, there is an opportunity to get by control board repair... This is done by replacing the non-working resistor on the microcircuit and soldering the burnt contacts.
- Problems with the wiring. You will need to twist the wires or completely replace the loop. Contacts that have oxidized will need to be cleaned.
Understanding common breakdowns and error codes makes it possible to quickly and fairly accurately find out the degree of damage and eliminate it as soon as possible. The Samsung washing machine will serve for a long time faithfully if preventive measures are taken in time and monitored for its correct use. But in a situation where it is determined that the error code signals a serious malfunction, it is more advisable to resort to the help of professionals in order to avoid a complete failure of household appliances.
See also:
