After you have collected all the dirty things in the house, put them in the drum, added powder and conditioner, started the wash process and wait to start working. However, the liquid does not enter the compartment and the 4E error in the Samsung washing machine flaunts on the screen. Such an error can occur both at the beginning of the washing process and at the time of the operation. It is not uncommon for an error to occur during the rinsing process.
Those models that do not have a display, a 4E error in a Samsung washing machine occurs as follows: constantly burning temperature indicators. Among other things, an alarm occurs, in the form of constantly flashing indicators for rinsing and spinning speed. More information on the signal values of errors, machines without displays, can be found on the manufacturer's website or in the manual that was attached to the kit for the washing machine.
Samsung washing machine error code 4E indicates a problem during the water intake phase. If the Samsung washing machine does not collect liquid within 2 minutes from the start, or if it could not collect the required amount for the initial level in 10 minutes, the command device issues an alert and the operation is suspended or does not start at all.
We fix error 4E on our own
- First of all, you need to check for the presence of water in the tap, since it could simply be turned off and because of this you get a 4E error in the Samsung washing machine.
- Then check the mechanism that regulates the fluid supply process, which can be closed and simply does not supply water to the washing machine.
- If you use the aquastop inlet hose, you need to make sure that it does not have any mechanical defects. The hose may have been damaged, blocking the flow of fluid into the machine. A signal element will help you make sure of this, which warns of a leak, if the system still worked, then its color will change to red. In this case, you just simply need to replace the hose.
- Check the filter, made in the form of a small mesh, for clogging and, if necessary, clean it. It is designed to clean water from dirt particles, scale and chipped pieces of rust in pipes. The filter is located at the connection point between the hose and the machine, directly in front of the inlet valve. You need to turn off the water supply to the machine, then unscrew the water supply hose and carefully remove the filter mesh with pliers. Then, gently, using a small needle, clean and rinse it under strong pressure. The second solution to the problem is a citric acid solution, in which a filter must be placed for a period of 30 to 60 minutes, after which all scale must dissolve and after rinsing, you will get a clean mesh.
- If the error code 4E in the Samsung washing machine occurs for the first time, you need to disconnect it for up to 15 minutes, and then reconnect it. The controller might have crashed and a system reboot might have been required to return to normal.
- You will need to check the serviceability of the loops and contact fields that go to the inlet valve that pumps liquid into the Samsung washing machine. They could move away or oxidize, to eliminate this malfunction, it is necessary to bring them to their original position or to clean the contacts.
- If the E4 error in the Samsung washing machine manifests itself in the form of a set and instant drainage of water, you need to make sure of the quality and correct installation of the drain into the drain.
If, after carrying out all the above methods, the 4E error in the Samsung washing machine has not been eliminated, it is best for you to contact the professionals who can easily identify the causes and eliminate the malfunction.
See also - How to change heating elements in a Samsung washing machine
Malfunctions that require specialist intervention
Let's talk about malfunctions that are very difficult to fix with our own hands and it is better to turn to specialists:
- The washing machine shows signs of inoperability, for example: water does not collect. This can be caused by a malfunction of the intake valve, due to which the fluid supply is regulated. If it malfunctions, it does not open and the water supply stops.
- During the washing or rinsing process, an error 4E is issued - this may be caused by the inoperability of the command device, which is responsible for controlling the operation of the washing machine.
- No water is delivered after the start of the wash cycle. This is due to the fact that the relay, which is designed to measure the water supply, has failed. The most common reason for this is:
- its blockage;
- damage or disconnection of the relay during transportation or misuse.
To eliminate error 4E, it is necessary to clean or replace the pressure switch pipe.
In this article, we examined the causes of the 4E error in the Samsung washing machine and the actions that must be taken if they occur. If you are not confident in your abilities, then we highly do not recommend that you undertake repairs, and the best solution for you, so as not to damage anything else, would be to contact specialists who know their business.
See also:
- 15 best washing machines from 30,000 to 40,000 rubles according to customer reviews
- Top 5 Whirlpool washing machines according to customer reviews
- 6 best Bosch washing machines according to customer reviews
- 7 best Indesit washing machines according to customer reviews
- 7 best LG washing machines
