Like any household appliance, a washing machine tends to break down. More precisely, a certain part or several breaks in it, depending on the severity of the breakdown. Samsung washing machines are no exception. More specifically, in this article, we will talk about how the heating element is replaced in a Samsung washing machine.
Sometimes it happens when, during the wash, the machine gives an error, which indicates that the water is not heated enough or completely cold, which indicates a malfunction of the heating element. The washing machine will stop the washing program and you have to get to the heating element itself and dismantle it in order to find out the reason. How to replace the heating element in the washing machine will be discussed below.
How to get the heating element of a Samsung washing machine
A feature of these washing units is that the heating element is located directly on one of the outer walls of the tank and getting to it is not always an easy task. But nevertheless - this is not an impossible action. It may seem so only at first glance. Therefore, you do not need to contact the masters, and for an additional fee, replace the heating element for the Samsung washing machine. You can do this yourself. Before changing the heating element, it is necessary to disassemble the Samsung washing machine. Here's how to get the job done:
- first, we drain the water remaining in the tank, for this you need to unscrew the hose with the filter, and the water will flow out by itself;
- then it is necessary to disconnect the front panel of the washing machine by unscrewing the bolts that hold it;
- remove the powder box, unscrew all the remaining fasteners;
- the unscrewed control panel can be pushed aside so as not to interfere;
- now you need to carefully remove the sealing rubber around the hatch. This should be done very carefully so as not to damage the cuffs. it is not easy to replace it;
- use a flat screwdriver to pry off the plastic panel and expose the body of the machine;
- now the control panel can be unscrewed and pulled out, having previously disconnected the harnesses and contacts;
- the front panel is now easily removable and we can see the inside of the washing machine.
After the front cover is dismantled, you can see the heating element itself on the Samsung washing machine. In this position, it can be checked without removing it. Initially, you need to measure the resistance with a multimeter. The process is simple and does not take much time, if you have certain knowledge. Attach the ends of the multimeter to the contacts of the heating element, and turn on the device. The meter reading should range from 25 to 30 ohms. In this case, the electric heating element is serviceable.
If it turns out that the heating element is still defective, it must be disconnected and replaced with a new one, previously purchased. Here is the order of replacement:
- unscrew the nuts from the mounting bolts;
- sip contacts from side to side;
- with a hammer, you can gently knock a couple of times on the studs from which the nuts have just been twisted;
- carefully pull out the faulty element.
After removing the faulty heating element, it is necessary to check the resistance of the new part again, and if it is in good working order, then you can put it in place. Put some machine oil on the gum first. The installation process is the reverse of dismantling.
See also - Samsung washing machine gives error 5E: we solve the problem ourselves
Related actions
After removing the heating element, you should pay attention to its location. During the use of the washing machine, debris (scale, powder residues, threads, buttons, etc.) may accumulate on the heating element and its location. It is worth paying immediate attention to this, since removing the heating element and replacing it in this case will not be enough, because this can lead to an early failure of the element.
It is recommended to check and thoroughly clean the heating port after removing the heating element. Depending on the model, this can be done simply by hand, or, as the masters advise, with a tablespoon. After cleaning, you can install a new heating device and be sure that it works out.
We hope this article has given you a rough idea of how the heating element is replaced in a Samsung washing machine.
See also:
- 5 best Whirlpool washing machines according to customer reviews
- 6 best Bosch washing machines according to customer reviews
- 7 best Indesit washing machines according to customer reviews
- 7 best LG washing machines
- 7 best Gorenje washing machines according to customer reviews
