DIY food processor repair

Today, the Bosch food processor and many other manufacturers have become almost indispensable devices in the kitchen. There are various modifications of these units that allow you to perform various tasks, and you will not make any special efforts. For some housewives, they have become very important, and any breakdown in the system becomes a serious problem. In this article we will tell you about the device and how to repair food processors with your own hands.

Food processor device

The device consists of separate elements of the mechanism, the most basic elements are as follows:

• Electrical engine;
• receiver of processing products;
• camera for processing ingredients;
• sets of nozzles and knives;
• the main control panel of the combine;
• electrical wiring connecting the main elements.

The body material for combines is usually made of plastic. However, all other parts, such as attachments, knives and other elements are made of stainless steel, as it is durable, and it is on the inner parts of the device that the greatest load is placed.

See also - 5 best food processor with meat grinder according to customer reviews

The main causes of problems

Combines are divided into several types:

• mini;
• compact;
• multifunctional.

The last type of combines are those in which, for example, there is a combination of a meat grinder and a juicer. However, despite their different functionalities, they all have the same operating principle.

After loading the products into the working chamber of the combine, they are brought to the desired state according to the given program. Processes can be changed by replacing nozzles with them and giving the device the necessary commands. The attachments are driven by an electric motor. It's easy enough to understand that your food processor needs urgent attention:

• new sound effects that the device has not previously emitted, for example - creaks, knocks, rattles and others like them;
• you feel that an unpleasant smell of burning wiring comes from the car;
• cracks and chips have formed on the nozzles;
• the unit starts to work at an uneven pace, or it works in the wrong mode according to a given program;
• the device does not want to activate and start working.

As for the torque transmission part, some combines use a belt transmission to transmit torque to the main working bodies. When the device starts to perform poorly, it is possible that it is time to replace the worn out belt. There is also a key transmission of torque forces, in this case the key may wear out, which will also lead to the inoperability of the combine.

There are many options for malfunctions of combines, perhaps some of its internal elements may fail, in case of failure of one part, the whole mechanism may break. Also, not rivers are cases when problems arise in the wiring of the unit itself, when a short circuit occurs.

Harvester defective - what to do?

Sooner or later any owners will have to independently repair your food processor. Before disassembling the food processor, make sure it is still under warranty after purchase. If there is one, then it is best to take the unit to a service center so that they provide the necessary service and return the combine to its working capacity.

But as happens in most cases, breakdowns occur after the end of the warranty period, here it is already worth trying to disassemble and make food processor repair Bosch, before you go and take it in for repair, where you will be charged a lot of money for repairs.

First of all, we disassemble the food processor, however, remember well what was removed and unscrewed from where, since you will have to assemble the unit back. All actions boil down to the following:

• turn off the device from the mains and dismantle all removable parts;
• remove the combine itself and make sure the integrity of the belt and drive gears;
• remove the above items, and take out the engine. Inspect it for integrity and performance;
• Remove the protective cover from the gearbox and check the drive shaft for signs of defects.

In case you have a different model, you can easily find videos and detailed instructions on the Internet.

When you are going to buy a replacement for some part, be sure to take the original ones, since third-party ones simply will not be able to safely stand in the groove. You can purchase such items at special service centers, or order them online.

Tips on how to extend the life of the combine

1. It is best to process chopped foods, and avoid frozen vegetables, meats, and other items. It is also not recommended to crush solid ingredients;
2. As soon as you feel an unpleasant smell coming from the combine, immediately turn it off in order to avoid a short circuit and prevent a breakdown;
3. After you have finished the work, it is necessary to thoroughly rinse those elements of the combine that took part in the processing of products. Dry all parts thoroughly before reuse;
4. Under no circumstances use attachments that have defects, this can harm the combine itself;
5. After the warranty period has expired, it is best to regularly (at least once or twice a year) carry out maintenance work on the combine. Disassemble it and lubricate the necessary components of the mechanism, as well as replace the worn parts of the device in advance, if they are found during disassembly, in order to avoid malfunctions in the future.

Conclusion

We have told you the main ways to make repair of food processors, and how best to avoid unpleasant situations with a breakdown of this device. In case of difficulties, it is recommended to contact the craftsmen who will find the malfunction and make high-quality and correct repairs.