Pros and cons of glass IR heaters

Content:

Principle of operation
Device
Advantages of glass infrared heaters
Where is it better to place?
Are these devices safe

For those who are looking for new solutions and ways to heat a room, an elegant type of heaters - a glass infrared heater - came to the rescue. This is a novelty in climatic technology, which has established itself as a device with high efficiency and modern appearance.

However, most consumers are wary of this type of heater, as they have a number of questions regarding their technical characteristics and properties. In this article, we will consider in detail what principle of operation, type of installation, parameters and basic properties of these heating devices.

Principle of operation

A glass heater has the ability to virtually instantly heat a room. From the moment it is plugged into the power grid, the device starts up and converts electricity into heat.

The device works according to the following scheme: it emits long-wave infrared, which are aimed at heating objects (floor, furniture), and heat is released from them, which heats the air. Thus, heating is considered more efficient.

Due to the radiation of long-wave infrared, it requires installation at a relative height, depending on the purpose and power of the device. But in any case, its installation is recommended at a height of at least two meters above the floor level.

Heaters in this category consume little electricity, but are characterized by significant heat transfer.

Device

This heating device in its structure contains a glass sandwich, which actually acts as a heat generator. The heater is built as follows:

The front cover (facade) is tempered glass, which has a high threshold of endurance to high temperatures and impacts.
A special diffraction grating - scatters and lengthens (fish out) infrared waves. The latter, in turn, carry a large amount of heat and have a high degree of penetration.
Heating element - consists of deposition from a semiconductor material, which actually converts a voltage of 100-400 V into heat.
Heat-insulating layer - is a block (gas-air), which reflects and protects the reverse side from the high temperature flow.
Heat wave reflector - together with a heat-insulating layer, concentrates heat energy in the desired (front) direction. And they also help to ensure that it does not diverge in unnecessary directions.
The back panel (coating) is a special glass that inhibits the emission of infrared rays.
Protective cage - reinforces the function of the rear panel.

As you can see, at first glance, a thin and compact glass heater is quite structured and has a well-thought-out mechanism of operation. That in the complex ensures its well-coordinated and safe work.

Advantages of glass infrared heaters

During operation, this device has proven itself to be very efficient and cost-effective.In general, the following advantages of a glass infrared heater can be distinguished.

Endowed with a high coefficient of performance (COP). This means that the device generates 97% of the energy expended.
Has a temperature controller - this allows you to switch the thermal modes. That is, no matter what the temperature outside the window is an autumn rain or a winter blizzard, your heater is ready to provide you with a favorable temperature in the house. Tempered glass can tolerate sudden changes in temperature even by 200 degrees.
Easy to install, and thanks to the reinforced front screen option, it can be mounted to a wall or ceiling at a distance of 50 mm.
They serve for a long time, the service life is up to 25 years.
Almost silent - they work quietly.
As compact as possible, up to approximately 2.5 cm thick.
Large selection in appearance.

Economical in consumption, with total heat transfer. Easy to install and elegant in design. All these advantages are taken into account in its price. The cost of such a device is higher than the cost of other types of heater. However, it is fully consistent with quality and style.

Where is it better to place?

As noted earlier, this heater emits long-wavelength rays that penetrate deeply. So, the higher the device is installed, the greater the scattering radius of these rays. That is, among the installation options, the type of installation is considered the best - ceiling.

It can be installed in the usual way or in the ceiling. Different materials of manufacture allow you to choose a heater that would fit the material and style of the ceiling as much as possible from the outside.

In an upright position, it can be wall-mounted - wall mount type. And the design and functionality of the device allows it. The only drawback will be less efficient heat distribution, that is, installing the same device on the ceiling would provide better heat in the room.

However, there is also a significant advantage to this installation method. Different models have interesting designs of glass heaters. Often made in the form of a painting or a mirror. Therefore, having placed this on the wall, it is difficult to recognize a heating device in it.

Their compact, modern design allows them to be used in interesting style ideas.

In addition, the devices are quite stable and not whimsical. Well adapted for wet and damp rooms. In this regard, the installation of such a heater is possible:

In the room.
In the bathroom.
On the veranda.
In the warehouse.

The use of such devices is practiced not only for heating housing, but also for industrial premises. True, given this, they have their own differences in technical indicators. The principle of operation is the same in all variants.

Depending on the area and needs, Glass heaters can be installed as a single option or placed several on one area.

Are these devices safe

The general characteristics are quite positive. The device is simple and affordable. The only question that worries the consumer is whether they are safe to use. We will expand on this issue in order to dispel doubts and fears.

Glass IR heaters are considered environmentally friendly, do not burn oxygen in the room.
Infrared radiation has a positive effect on the body as a whole.
The principle of operation does not emit any emissions (combustion products).
Made of durable material, durable and low maintenance. Despite the fact that it is made of glass, it cannot be broken. It should be handled as you would with a heater made of a different material.

In order for the operation to be safe and efficient, there are several simple guidelines, namely:

The heater must not be installed against a door or window. Because in this way, the directed heat will literally leave the house.
Mount the heater at least 2 meters above the floor.
Do not place it close to curtains and curtains, or other objects that are easy to handle. After all, the device heats up to a high temperature, and it is better to avoid risk factors.

Now, understanding how these relatively new types of heaters work, each consumer will draw objective conclusions for the right choice. Technological progress does not stand still. Every time we get the opportunity to make our home not only warm, but also stylish and beautiful at the same time.

See also:

3260 0