Automated cleaning robots collect dust, dirt from a smooth floor surface, some clean surfaces with low pile. But most of the models do not perform truly high-quality wet cleaning, are not able to remove dried stains. The South Korean manufacturer has released a new line of polishing robots Everybot, in which the water supply is automatic. Compared to the previous RS500, the new product has a function of avoiding obstacles, there is an automatic program for wet and dry cleaning, manual vertical cleaning of surfaces, including mirrors, tiles, windows.
Specifications
- Manufacturer - South Korea.
- The battery is lithium-ion with a battery capacity of 2150 mAh.
- A fully charged battery lasts for 50 minutes.
- Charge recovery 150 minutes when the battery is completely discharged.
- Charging from an adapter or dock station (purchased separately).
- Consumes 27 watts.
- Moves at a speed of 20 cm / s.
- Filtration system Aquafilter.
- The volume of the water tank is 60 ml.
- Dimensions L - 37 cm, W - 20 cm, H - 11 cm.
- Noise at maximum mode - 74 dB.
- Remote control panel.
- Notification of the device state by light indication and sound signal.
- Infrared height difference sensor to prevent the robot from falling off steps or high thresholds.
Appearance
Compact device, width and height determine the minimum clearance from the floor and the dimensions of the aisles. The body is made of plastic, the main color is black with bright orange stripes along the top. Tinted transparent plastic inserts at the front and back. The upper jumper can be used as a carrying handle, the bottom has convenient finger recesses.
An important element is bumpers. They go around the side surfaces of the case. Made of hard plastic, tinted but transmissive to IR light. The outer part is covered with a resilient rubber-like compound. The main function of the coating is to protect the surfaces of furniture and the cleaner body from mechanical shock in a collision.
The spring-loaded bumper mounts serve as an alarm system for obstacle sensors. When shifting, triggering occurs. The sensors are located behind special narrow windows directly on the bumper.
The robot start / stop button is located in the front visible part of the body. For visibility, it is made of translucent light-milk plastic. Built-in lighting that changes color, informing the state of the cleaner in real time.
Due to the structural peculiarity of the arrangement of the axis of the disk drives, the movements of the robot are in an arc, in a circle or in a skid. It does not move back and forth.
There is no dust container, since the flooring is cleaned by intensive rotation of the polishing discs.
Functionality
The RS 700 robot polisher is used in six modes provided by the manufacturer:
- Basically. Automatic mode is used for cleaning a large area until the battery is completely discharged.
- Y-shaped path. For high-quality, thorough floor cleaning.
- Local (local). For quick cleaning of small areas. The robot moves in a circular path.
- Perimeter or 20 minute. Cleans surfaces along walls, furniture, removes dirt in corners.
- Manual.The vertical surface is cleaned. Remote control or mechanical control by the handle.
- Turbo mode. Acceleration is used in all of the above modes.
All modes can be started from the remote control. For manual cleaning of vertical surfaces, you need to press the button on the body and hold it for 30-60 seconds. This is necessary to block the floor lift sensors.
For wet cleaning, clean filtered water is poured into the container. For dry - do not pour.
The robot can determine its location using an IR diode and a receiver. If the cleaning ends under the furniture, then the cleaner leaves from under it into an open space. That is, the user does not have to look for where the equipment is located.
Equipment
Cleaning wipes are thick, retain up to 20% moisture. The absorbent layer is located at the top. The underside has soft fringes and stiff bristles that scrub away stubborn dirt. Orange fringe. The material is durable, machine washable.
Before starting work, the napkins are abundantly moistened with water, excess moisture is squeezed out. Then they are attached to the discs-platforms, the central hole of the napkin is aligned with the projection of the disc.
Under the bottom cover there is a battery and two discs for attaching wipes. Power adapter cable - 115 cm.
Remote control with rubberized buttons.
Advantages and disadvantages
Pros of the model:
- Performs high-quality wet and dry cleaning of large areas.
- Works autonomously for 100 minutes.
- Reduced size compared to the previous RS500 model - greater maneuverability and ability to clean under low objects.
- The body is ergonomic, shock-resistant plastic, additional protection against impacts - bumpers with rubber-like dusting.
- Automatic wetting of wipes during cleaning.
- Two control methods - from the remote control and the housing button.
- Obstacle and height difference sensors. Protective soft bumper.
- The novelty is less likely to hit obstacles and objects at increased speed thanks to the IR proximity sensors.
- Lightweight 1.9 kg. The device is easily and comfortably held in the hand, does not overload the muscles.
Disadvantages:
- According to users, the price of 20,000 rubles does not correspond to the premium class of the device.
- Small cleaning area in one cycle.
- The robot does not build a route and moves chaotically, there is no definite trajectory of movement, it cannot draw up a map of the room on its own.
- Manual setting for charging.
- Small water tank capacity - 60 ml. Have to top up when washing vertical panels and windows.
- The noise level is louder than stated by the manufacturer.
See also - 10 best robotic vacuum cleaners under 20,000 rubles
See also: robotic vacuum cleaners up to 20,000 rubles
