How to replace a light bulb in a refrigerator: types of light bulbs and how to replace them

Lack of lighting in refrigerators causes a lot of inconvenience, especially in the evening or at night. In the old-style refrigeration units, typical low-power incandescent lamps were installed. In modern technology, fluorescent or halogen lamps are used, they are economical, energy efficient, and do not heat up. But sometimes they also need to be replaced. From our article you will learn how to replace a light bulb in the refrigerator with your own hands.

What bulbs are used in refrigerators

A refrigerator is a single mechanism consisting of many units and parts. They are all necessary and equally useful. A refrigerator light is no exception.

There are several types of lamps used in refrigerators:

• General purpose incandescent lamp: burns with warm light, affordable, relatively short life. It heats up during operation, the service life is short - up to 1000 hours.
• Halogen: can be either cold or warm, economical, lasts longer.
• Luminescent: creates bright cold light, less costly, working life - up to 15,000 hours.
• LED: generates a glow in any color range, including colored tones. Does not heat up, is insensitive to low temperatures, "eternal" lamp - its service life is over 100,000 hours (about 11 years of continuous operation in household refrigeration appliances).

The type of lamp does not affect the cost of the refrigerator, but it does affect the lifespan.

Refrigerators often use 15 W or 25 W lighting fixtures. In large chambers, 2 bulbs of the same power are installed, or one up to 40 W.

See also - Why the refrigerator began to work loudly: the causes of the malfunction

Why isn't the lamp on in the refrigerator?

If the lights go out unexpectedly, you may not need to replace the lighting fixture.

• Check wiring, electrical outlet, power cord.
• Plug another household appliance into the power outlet, such as a table lamp or hair dryer.
• If there are no problems with the power supply, observe the operation of the refrigerator itself. Natural shutdown lasts up to 30 minutes, if it is silent for longer - the problem is in the transformer.
• The light may not have been burning correctly recently (the light flashes, turns off, and then comes on again). Check the cartridge, clean the contacts from grease and dirt.

Read also the article: what to do if the refrigerator does not work, the light is off.

How to replace a light bulb in a refrigerator

But if the lamp really burns out, you need to change it, before that, be sure to turn off the refrigerator.

Replacing a light bulb in a refrigerator is a simple process. You need to know how to get to the lamp in order to replace it, because it is covered with a shade, which may not be removed.
See also:

• 10 best Atlant refrigerators according to owner reviews
• 10 best refrigerators from 30,000 to 40,000 rubles according to buyers
• 11 best BEKO refrigerators according to customers' opinion
• 15 best Liebherr refrigerators according to customer reviews

Replacing the lighting lamp in Samsung and Atlant refrigerators

The plafonds of these refrigeration units are held by screws. The light fixture is mounted on pins or connectors.

So, to change the light bulb, you need:

• disconnect the refrigerator from the power supply by turning it off;
• unscrew the screws on the backlight plafond, remove the plafond;
• disconnect the connectors and contacts;
• unscrew the burnt out lamp, screw in a new one;
• fix the cover with screws.

Some models Samsung have a protective strip, which is removed before replacing the lamp in the refrigerator.

Replacing a light bulb in Ariston and Indesit refrigerators

Here the cover is not removable, but has a retaining screw that releases one side. It is necessary to unscrew the screw and bend the dynamic part of the plafond, opening access to the light bulb.

Lamp replacement in Stinol refrigerators

The plafond in refrigeration units of this brand does not have fastening screws. In order to remove it and gain access to the lamp, the cover is gently squeezed so that the latches are disengaged. After that, you need to unscrew the burnt out light bulb and replace it with a new one. Put the plafond in place as described above.

How to extend the life of a light bulb

In order not to have to change the lamp often, you need to follow a few simple rules:

• Keep an eye on the humidity in the refrigerator, as condensation and water are the reason why frequent lamp replacement is required.
• For refrigeration appliances, lay out an earthed euro socket.
• Use the refrigerator only in accordance with the instructions. In particular, observe the humidity and temperature conditions.
• Power surges are also one of the causes of light bulb burnout. Use a surge protector or uninterruptible power supply.
• Although the type of lighting is not an indicator of the quality of the refrigerator, when buying, give preference to installations with LED lamps. They are reliable and durable.

Advice:

If the light bulb burns out before it reaches the specified time, check the shutdown button, which is usually located inside the camera on the side or top panel. The deformation of the door can lead to the lighting fixture working around the clock, the light is on even when the door is closed. To fix the problem is simple: stick a polystyrene plate of the required width on the button itself.

In this article, we tried to describe in detail the process of replacing a light bulb in a refrigerator Atlant, Indesit, Samsung, etc. We hope our article helped you!