With the onset of cold weather, people begin to think about ways to heat their homes. In private houses, there is mainly stove or centralized heating, as well as fireplaces; in multi-storey buildings, heating is centralized. But this is not always enough, and people begin to purchase heaters - such devices as a convector and a fan heater are in the greatest demand. These units are presented on the market in a large assortment and differ in the principle of operation, price, manufacturer and type, so it is rather difficult to make a choice. In this review we will try to find out which is the best convector or fan heater.
Fan heaters - principle of operation, pros and cons
It is difficult to understand what is the difference between a fan heater and a convector, because in fact, they just circulate warm air. The principle of operation is as follows: warm air flows rise upwards, and cold air flows downwards. But there are still differences. The fan heater is easy to operate and most buyers can afford it. Such units are:
- Desktop;
- Outdoor;
- "Thermal curtains" are installed under the door;
- Ceiling mounted.
Principle of operation: the fan drives air through the heating element, from where it comes out already warm. Note that the heating element can be:
- electric;
- ceramic;
- tubular.
Customers mainly opt for fan heaters with a ceramic heating element, because the room is heated without any combustion products.
See also - Comparison of the capabilities of electric boilers and convectors
Among the advantages of a fan heater are the following:
- Heats up in a short period of time - correctly selected power allows you to heat up a room in a few minutes;
- Affordable cost - buyers choose this device due to its price;
- Small size - you can carry the device to any room;
- Ergonomic - low energy consumption.
Disadvantages:
- Noise - this type of device works very loudly;
- Unpleasant odor - when dust or debris gets on an open spiral;
- Environmental pollution - occurs as a result of oxygen combustion;
- There is a possibility of overheating;
- Decrease in air humidity.
If you have chosen a fan heater, then you need to buy units with a ceramic heating element and a deep-cleaning sponge filter with an apparatus power of 1-3 kW.
See also - Which heater is better oil or convector?
Convectors - operating principle, pros and cons
When a room is heated with this electric heater, cold air passes through the grill, which is located in the lower part of the convector, and then through the heating element. As a result, already warm air comes out through the grill on the top panel, which is distributed throughout the room.
Most of the models are waterproof, so they can be used in saunas and bathrooms.
Convectors by their type are:
- Gas - expensive because of the need to connect to the gas main;
- Electric - the simplest and most common;
- Aquatic;
- Infrared.
When comparing a convector and a fan heater, it becomes clear that the first is much more complicated in design.
By the type of arrangement, convectors are:
- Outdoor;
- Wall mounted;
- Combined;
- Intra-floor.
See also - Which electric convector is better to buy for home
Convector advantages:
- The air heats up quickly;
- Fire safety;
- Various mounting options;
- You can select the required temperature level;
- You can create a network of several devices;
- Silent operation;
- Safe use;
- Compactness;
- Durability.
Disadvantages:
- It can take a long time to heat up to the optimum temperature;
- Afraid of drafts - out of order;
- A power failure will lead to breakdown;
What is better to buy?
If you are faced with a choice: buy a convector or a fan heater, then you must consider the following:
- If the heater is being bought for several years, then it is better to choose a convector. If you bring out one network, then it will be possible to heat several rooms at once. The main factor will be the presence of a thermostat with which you can adjust the temperature;
- If you need to quickly heat up the room for a short time, then the choice is obvious - a fan heater;
- The best option would be to combine a convector and a fan heater. First, the first will quickly heat the air, and the second will maintain the required temperature.
In this article, we tried to explain to you what the convectors from fan heaters are exposed to. We also examined in detail all the advantages and disadvantages of these types of heaters, and the principle of their operation. You just have to decide what is preferable for you and make a purchase.
See also - Which heater does not burn oxygen or dry air
