home Reviews Review of the robot vacuum cleaner Clever & Clean Zpro-Series Z10 III LPower

Review of the robot vacuum cleaner Clever & Clean Zpro-Series Z10 III LPower

A device from the middle price segment, offering users quite pleasant functionality. The robot works as a standard cleaner and floor polisher. The package contains everything you need for careful work, spare consumables and a device for creating boundaries - a virtual wall. How good the vacuum cleaner is in business, this review will analyze.

baner_ali_gradient

Specifications

Clever & Clean Zpro-Series Z10 III LPower

  • Carries out dry and wet cleaning.
  • Waste collection in a 500 ml cyclone filter.
  • Complete with a fine filter and an electric brush.
  • Li-lon battery with a capacity of 2200 mAh, the charge lasts for 120 minutes, it lasts for 240 minutes.
  • Noise level up to 60 dB.
  • 8 driving modes.
  • Virtual wall to limit the cleaning area.
  • Automatic installation for charging.
  • Weekly programming.
  • Height 9.6 cm.

The average cost is 20,000 rubles.

Equipment

Clever & Clean Zpro-Series Z10 III LPower

  • Center brush set.
  • Battery charging adapter.
  • Remote control with screen.
  • Spare filters.
  • Spare side brush.
  • Washing pad for wiping the floor, consists of 5 replaceable nozzles.
  • AQUA kit.
  • Wet cleaning nozzle.
  • Container for water.
  • Reusable microfiber napkins - 2 pcs.
  • Brush for cleaning the device.
  • Floor-standing docking station.
  • User's manual.
  • Virtual wall.
  • Bearings for fixing the central brush - 2 pcs.

Appearance

Clever & Clean Zpro-Series Z10 III LPower

The robot has the shape of a regular circle, the surface of the body is matte. Above and on the sides, the vacuum cleaner is black, from the rear it is gray. A white cover is fixed at the top to facilitate finding the device in dark rooms.

On the upper part of the case in the grooves there is a silver plastic handle with chrome plating, if necessary, it can be easily lifted at a comfortable angle. Here on the top panel there are 3 buttons with a good response to pressing, they are illuminated by blue LED lights. Above the buttons closer to the handle is the indication of the device operation, highlighted in red. During operation, the device also emits sound signals that cannot be disabled.

The height of the appliance is 9.6 cm, which makes it somewhat difficult to pass it under low furniture. The corners of the instrument are slightly beveled to facilitate passage under surfaces. The bottom edge is beveled at a steep angle for maneuverability.

At the bottom there are swivel wheels with a stroke of 25 mm, the robot's circumference coincides with the diameter of the wheel axles, it steadily turns in place. On the front side of the seals are round, arranged in two rows horizontally, here are also small oval windows, covered with tinted plastic. Seals are a protective part that protects against mechanical damage, infrared sensors are hidden behind the windows.

On the front side in the center there are contacts for docking in a docking station. Slightly above the contacts is the sensor responsible for parking at the station. There is also a station search sensor and a virtual wall. He also determines whether the clearance under the furniture is safe for the vacuum cleaner and whether it can pass under it.

At the bottom there is a dust collector, a guide roller, brushes and a hole into which debris is sucked. Here, at the bottom, there are 4 sensors operating in the infrared range, determining voids and gaps that are safe for movement. The garbage container is disconnected by pressing the button, but it cannot be washed in water, since there is a fan in it.

At the bottom there are two pairs of side brushes. Fixed with self-tapping screws.The design of the brushes is very practical - they are bristles located on elastic floods in bunches, even if the brush is deformed, it is easy to restore it by holding it under hot water and returning it to its place.

Functional

Clever & Clean Zpro-Series Z10 III LPower

The vacuum cleaner works fully automatically, independently determines the trajectory of movement, correcting its path if objects are encountered on it. At the end of the preset cleaning mode, the robot automatically returns to the base. The suction power is automatically regulated, depending on the type of surface to be cleaned, which makes it possible to use the battery charge more efficiently.

During cleaning, the side brushes move all the litter to the center, where a large scraper picks up the baton, moving it to the central brush, which is already throwing it into the upper compartment of the garbage container. The bristles on the brush are cleaned by themselves, with teeth located along the edge of the flap. For wet wiping of the surface, a pallet and a napkin are attached to the vacuum cleaner.

Vacuum cleaner operating modes:

  1. Auto cleaning is carried out over the entire available area until the battery is completely discharged.
  2. Spot - thorough cleaning of a given, limited area. During this mode, the vacuum cleaner moves in a spiral with a turn of 1.5 meters, then in the opposite direction to decrease the diagonal of movement. To start cleaning, the robot must be manually installed in the desired location.
  3. Manual mode - control through the remote control, in this mode, movement is performed in all directions.

In all modes, you can adjust the speed of work, reduce it or increase it, set the repeat option automatically, that is, resume the cleaning cycle interrupted by charging. It is possible to program the device by day of the week.

The included virtual wall is powered by AA batteries and emits beams that the robot detects as an obstacle. Turning on is done with one button, after which the device releases beams up to 3 meters long.

baner_ali_gradient

Advantages and disadvantages

Clever & Clean Zpro-Series Z10 III LPower

According to customer reviews, the following advantages of the device can be distinguished:

  • Low noise level, comfortable for cleaning.
  • Does not damage furniture and walls.
  • High suction power.
  • Remote control.
  • Programming the cleaning schedule.
  • A virtual wall is included, such a set is not always found even in expensive models.
  • A good set of consumables and spare parts.
  • Disinfection function.
  • Large volume of dust collector.
  • Wet cleaning.
  • Parks quickly on the docking station, does not ignore the area around it, and cleans up properly.

Minuses:

  • During cleaning, it may catch around the docking station and try to move it.
  • The object sensors are located on the bumper and do not detect obstacles that are lower or higher. In a collision, the bumper protects the robot and objects from damage, but the battery charge is not used for its intended purpose.
  • Charging takes a long time.
  • Tangled in wires.
  • Disorders in tight spaces.

See also - 10 best robotic vacuum cleaners under 20,000 rubles

See also: robotic vacuum cleaners up to 20,000 rubles









604 0

Add a comment

How to choose

Reviews

Repairs