How to replace the dishwasher inlet and drain hose

posudomojka Buying a dishwasher is a joyful event for every woman. This modern unit will definitely become your faithful assistant in everyday life, will save not only your precious time, but also the cost of water supply. Indeed, using a dishwasher, you can significantly reduce water costs, since such devices are as economical and convenient to use as possible. Now you can wash all dirty dishes at once quickly, and you don't have to do it yourself. The main thing is to make sure that dishwasher drain hose always remained in good condition.

Unfortunately, household appliances are not eternal, and each device has its own definite resource, at the end of which it will inevitably fail. However, you can significantly extend the life of your kitchen workers, and not only helpers, if you carefully monitor their condition and take proper care of them. The more complex the unit, the more maintenance and additional funds it requires, but if you regularly check the performance of individual elements of the machine, you can do without expensive repairs.

Content:

Dishwasher Hose Types
What is the best way to prepare for such a repair?
What is Aqua Stop?
Sewer connection
How to extend the life of your dishwasher

Dishwasher Hose Types

dishwasher hoses
As strange as it may sound, the modern range of dishwashers is more reliably protected from leaks than the same washing machines. As a rule, all dishwashers are equipped with two hoses: drain and inlet, and usually the manufacturer gives a good guarantee for these products. In view of this, breakdowns of such accessories are quite rare. However, no one is safe from accidental damage that could result in a burst hose. Also, many consumers have faced situations where dishwasher inlet hose was simply not included in the kit or was too short for normal device connection.

In any case, you may need a dishwasher drain hose at the most inopportune moment, so you need to clearly understand how to make your choice and installation correctly. If you begin to notice that it has become unsafe to use your dishwasher, then replacing the hose is simply necessary. This can be understood by leaks, which will be inevitable in such a situation. Unlike replacing internal parts, changing a hose is not a difficult task, and absolutely everyone can cope with it.

What is the best way to prepare for such a repair?

preparation for hose replacement First you need to disconnect the unit from the network, sewerage and water supply. Now our task is to push the machine to an empty place, having previously spread cellophane or rags there, which will be necessary so that the remaining water in the device does not spread across the floor. No repair is complete without quality tools, in this case reliable pliers and screwdrivers will come in handy.It goes without saying that you should already have prepared the hoses - the drain and inlet hose for the dishwasher. To correctly select their length, measure the required distance, and remember that these elements should not be installed in a stretch.

Today, you can buy hoses with very different lengths from one and a half to five meters, but the most optimal products are two or two and a half meters. Another important point: any drain or dishwasher inlet hose must be necessarily equipped with a technical passport, which will indicate all its main parameters. These include the permissible water supply pressure, temperature, and so on. Today, these hoses are most often made of PVC with fittings and a plastic cap nut. In addition, modern elements for draining or filling water can be equipped with a special Aqua stop valve, which prevents leaks.

What is Aqua Stop?

aquastop Today, when buying various household appliances, or accessories for it, you can hear from the seller the phrase Aqua stop, which is often applied to both washing machines and dishwashers. The aqua stop itself is an ordinary hose that is placed in a special casing with a device that blocks the water during an accident. This system is triggered at the moment of hose rupture or leakage, which helps to protect housing from a flood. Modern dishwashers from many manufacturers are already initially equipped with an aqua stop system, so you do not have to buy it separately.

How do you know that a given device has worked? If your dishwasher stops working and does not want to pump water in any way, then it is worth checking the hose. To do this, turn off the water and unscrew the aquastop: if the valve behind the nut is tightly pressed, and you cannot see any gaps, then most likely the aquastop has worked. In such a situation, it is necessary to change the hose, and every consumer can cope with this task, since there is nothing difficult in this.

As a rule, to replace the aquastop drain or inlet hose, you just need to shut off the water and unscrew it, and screw a new one in place of the faulty one. If you have chosen an electromagnetic system, then in this case, you will also need to connect a wiring recognition sensor. Aquastop hoses are not useless, as the vast majority of users believe today. It will reliably protect your dishwasher from leaks and prevent flooding, which can be fraught not only with general cleaning in the kitchen, but also with expensive repairs at the neighbors below.

Sewer connection

connection If the inlet hoses for the dishwasher can be connected without any special problems, then there may be problems with the drainage outlet. The most correct way to drain is to install a siphon through special valves that prevent water from flowing in the opposite direction. The drain hoses should be fixed to a wall or a special cabinet, about sixty centimeters high. It is necessary to bend it so that water flows without stagnation inside the device. Before connecting, it will not be superfluous to check the length of the hose, which should be sufficient so that it does not fit into an interference fit.

After you have fully connected the device, you need to run it idle for the first time to check the reliability of all connections. In the process, you will be able to determine the following:

How quickly water is poured into the unit.
Water heating quality.
Check the drying process.

Remember that the first cycle must necessarily include all detergents and additional agents that are used to wash the dishes.If you do not notice any deviations and the drain hose for the dishwasher is working properly, then the device can be used normally without fear.

How to extend the life of your dishwasher

dishwasher maintenance Devices such as a dishwasher can cost a lot of money, besides, we usually buy large household appliances for more than one year, so proper operation and care of the parting is very important. If you do everything strictly according to the rules, then you can forget about repairing or replacing the machine for a long time.

Make sure that your dishwasher is loaded correctly: the dishes should not go beyond the trays, as this will interfere with the normal operation of the device.
The mesh filter should be washed regularly, preferably once a week. To do this, you will need to remove the lower basket and unscrew the fasteners.
The same goes for the holes in the shower blades, be sure to check for debris or food debris.
Every six months it is imperative to clean the seal on the door; for this, special detergents are used.
Remember to clean your machine with a dishwasher detergent to keep your device looking good at all times.

Do not forget to choose the correct washing mode, in order to effectively wash certain types of dishes. In addition to the standard mode, such units have intensive wash programs, cycles for fragile dishes, quick wash, and so on. The more precisely you follow the rules of operation, the longer you can use your kitchen assistant. If you begin to notice that the device does not work as before, then you should contact a qualified technician who can quickly determine the type of breakdown. Do not try to make repairs yourself, because this can lead to irreversible consequences.

See also: