Modern dishwashers have been able to greatly simplify the lives of busy women, but their benefits do not end there. It's no secret that such devices can significantly save water, and also wash a huge amount of dishes at one time, which is sometimes very time consuming. If you want to devote more time to your loved ones, then most likely you are thinking about buying such a unit or have already bought it. Although the manufacturer gives a long-term guarantee for its equipment, none of us is insured against accidental breakdowns of such devices, and it is often the heating element for the Bosch dishwasher that suffers for various reasons.
It will be quite simple to determine such a breakdown: you will notice that the dishes are not washed, since it will not be possible to wash the devices in cold water with high quality. In the presented device, it is the heating element that is responsible for heating the water, it is performed in the form of a tubular element and can break for certain reasons. Most often this occurs from overheating, which can be a consequence of the formation of scale. As a rule, this problem is directly related to the hardness of the water and the lack of special softening salt, which must be added every time the dishes are washed.
What are the heating elements and what are their advantages?
Modern heating elements can be not only tubular, but also flowing. The first ones are, as already mentioned above, a spiral, which is located at the bottom of a special washing chamber. The flow-through devices are a heated water-conducting tube that is located outside the chamber. It is the flow-through heating elements that cope with their task much faster than the tubular ones, but at the same time they consume a huge amount of energy. Therefore, when choosing an assistant for washing dishes, it is worth considering this fact, since when the machine and any other equipment are running at the same time, you can knock out plugs, and in the worst case, the wiring will simply burn out.
Bosch tubular heating elements for dishwashers are more economical, but they require careful maintenance. As a rule, such devices oblige housewives to use only carefully selected dishwashing detergents, as well as additional solutions or powders to prevent the formation of scale. Tubular elements heat water by converting electrical energy into heat. Typically these heaters are made of stainless steel or carbon steel, copper, aluminum, titanium and other materials that can perform well even in corrosive environments.
See also - How to replace the dishwasher inlet and drain hose
Can I replace it myself?
Today, every consumer would like to avoid expensive repairs, or at least reduce the cost of it to a minimum. Therefore, more and more often they are thinking that replacing an electric heater for dishwashers is not such an overwhelming task.On the one hand, this is really so, because you just need to replace one out of order part with another - a new one. However, in reality, everything can be much more complicated, especially for those who have never dealt with the repair of large equipment.
Therefore, the best way out of this situation is to call a qualified craftsman who will not only replace the part, but also be able to determine with absolute certainty what exactly caused the breakdown. If you have never encountered the repair of such devices before, you can simply harm the equipment and completely disable it. If you still decide to make the repair yourself, then remember a few points that will allow you to replace the part as accurately as possible.
- First, unplug the appliance and turn it upside down.
- Heating elements in Bosch dishwashers are placed in the washing chamber, so you need to remove the bottom and find the part.
- In order for the defective element to be removed, you need to unscrew the bolts.
- To make sure a part is defective, check the electrical conductivity - failed parts do not conduct it.
- Install a new part and check the functionality of the machine.
What else is important to remember while using dishwashers?
Any breakdown is best prevented, and this directly depends on how correctly you use your household appliances. It is very important to clean your appliance regularly to keep your kitchen appliances safe for a long time.
- Be sure to use your dishwasher regularly, as bacteria can build up inside the unit during long periods of inactivity, which will negatively affect the health of your family.
- This appliance should only be cleaned when it is completely free of residual detergents and dishes.
- The first step is to check the rotating nozzles, since they should not have any blockages: very often these small holes are clogged with small food debris and other things.
- Carefully check and remove debris from all parts of the machine using fine tweezers or a toothpick.
- Be sure to wipe all doors and gaskets, you can do this with a detergent, and an old toothbrush will help to effectively clean hard-to-reach places. Treat gaps between spacers well.
- Pay attention to the lower part of the door, since this zone in many devices is dead and water does not get here. All debris and other contaminants can be easily removed with a damp cloth.
- Pay particular attention to the area at the bottom of the unit around the drain: for full access, remove the baskets and carefully remove all solids and other debris.
To protect yourself from injury, unplug the appliance before cleaning. Unfortunately, none of us is immune from ridiculous accidents, which can lead to breakdowns. If you need to replace the heating element for the Bosch dishwasher, then immediately think: can you do the repair yourself, or is it better to use the help of a specialist.
